|
| |
 |
Spectra Precision Lasers |
Trimble Specials From Railway Distributing Inc
LG20 Self-leveling Horizontal and Vertical Crossline
Generator
The Spectra Precision® Laser LG20 Crossline Generator is a
single horizontal line, single vertical line, and simultaneous
horizontal and vertical line generator which can also be used
with the optional HR250 receiver in a variety of line, level,
vertical plumb and general construction applications. The
durable, versatile LG20 works like a hand tool and replaces a
level, square, plumb bob, chalk line and optical instrument. Use
the LG20 every day on every job to increase your jobsite
accuracy and finish projects faster than ever!
With the Spectra Precision Laser HR250 Handheld Receiver, the
LG20 is also ideal for short-range exterior general construction
leveling and alignment.
Features and Benefits
 | The industry's brightest Crossbeam Generator features a
biased upwards beam with easy-to-see lines for fast
alignment and layout
|
| Water-, mud- and shock-resistant for improved
reliability and minimal repair cost
|
| Durable unit withstands a drop of up to 1 meter (3 ft)
onto concrete and still maintains consistent accuracy
|
| Self-leveling and plumbing allows fast, easy operator
setup
|
| One-person operation increases productivity and reduces
costs
|
| HR250 Receiver and many optional mounting accessories
can be used on almost all construction applications for
maximum jobsite versatility and flexibility
|
Applications
| Building interior walls
|
| Exterior building decks
|
| Septic tank installation
|
| Acoustical ceiling
|
| Drywall track installation
|
| Cabinet installation
|
| Trim layout
|
| General construction level and plumb with HR250 Receiver
|
|
LP40
Rugged self-leveling, four-beam pocket laser for plumb
up/down, level and square applications
The versatile Spectra Precision Laser LP40 is a self-leveling
plumb up/down, level and square beam pocket laser. Offering
unmatched durability, the versatile LP40 is ideal for a range of
applications including installing fixtures, putting in walls and
leveling foundations. The LP40 projects four beams up to 30 m
(100 ft) and can withstand a drop of up to 1 m (3 ft) onto
concrete and still provide consistent accuracy. One beam points
up while another points down to create a plumb up and plumb down
reference. The other two beams are offset at 90 degrees to each
other, pointing out horizontally to create level and square
reference points. The LP40 also features a self-leveling
mechanism for consistent repeatability so you can be sure your
positioning is accurate. Built-in magnets allow the LP40 to be
securely fit directly to drywall track.
|
HD50 Handheld Distance Meter
The rugged Spectra Precision® Laser HD50 Handheld Distance
Meter is designed to give specialty contractors a high-accuracy,
one-person distance measuring and estimating tool to measure
remote and difficult-to-reach places. Accurate to 1/6" (1.5 mm)
across the entire measuring range, the lightweight, portable
HD50 is more accurate than conventional tapes to help
contractors avoid costly mistakes and reduce expensive rework. A
visible laser dot lets you safely measure hard-to-reach places
or hazardous situations, such as large heights, factory
interiors or over water, remotely or from a distance. This
capability increases safety and efficiency, as well as provides
high accuracy and quick payback.
Features and Benefits
| One-person, 'non-contact' distance measuring up to 165
ft (50 m) allows one-person measuring to difficult-to-reach
or hazardous locations.
|
| Accuracy of 1/16 in (1.5 mm) across the entire measuring
range reduces measuring errors even over large distances.
|
| 'Area', 'volume', and 'continuous measurement' keys
allow direct access to measurement functions, and eliminate
math errors
|
| Visible red laser beam allows fast targeting.
|
| Intuitive user keypad is simple and easy to use.
|
| Built-in sighting system and waterproof to IP54 for easy
outdoor use.
|
| Operates over one year on four 'AAA' batteries for lower
operating costs and increased convenience. |
Applications
| Measuring distance, area and volumes
|
| Checking building square and area
|
| Measuring for material estimation |
|
Tough, highly versatile General Construction Laser
The highly visible, multi-purpose Spectra Precision® Laser
HV401 Horizontal Vertical Laser is an advanced laser with
exceptional accuracy and durability for general construction
projects. Replace the conventional method of stringlines and
optical instruments—the HV401 gives you easy setup and
one-person operation in a wide variety of commercial
applications to increase accuracy, maximize your return on
investment, and boost your productivity.
The HV401 is easy to set up, learn and use. A simple user
interface common on the transmitter and remote control gives you
automatic self-leveling and one-button operation. Designed for
layout of excavation lines, aligning concrete forms, and
performing as-built checks, the HV401 is your easy-to-use,
economical choice for vertical alignment tasks.
The HV401 can be paired with the
Spectra Precision
Laser HR550 receiver for general construction applications
or with the Spectra
Precision Laser CR600 for additional machine control
applications.
HV401 Features & Benefits
| Fast setup, minimal training time, and automatic
self-leveling minimizes operating costs and boosts
productivity
|
| One-person operation reduces labor costs
|
| Visible beam of up to 200 meters (600 feet) diameter
allows easy visibility—even at long distances
|
| Highly accurate at 1.5 mm at 30 meters (1/16 inches at
100 feet ) for precise measurements on the job
|
| Unique patent-pending lighthouse design protects the
transmitter head when dropped
|
| Temperature calibrated, high accuracy for consistent
performance across larger jobsites
|
| IP66 dust and waterproof for continual performance in
harsh conditions
|
| Withstands a direct drop of 1 meter (3 feet) or a 1.5
meters (5 feet) tip-over onto concrete
|
| Ability to be used up to 600 meters (2000 feet) diameter
with a detector makes the unit ideal for small to large
projects
|
| Multiple power options: NiMH rechargeable batteries,
direct power, or alkalines for reduced downtime |
HV401 Applications
| Cut and fill measurements
|
| Layout and excavation lines
|
| Positioning of concrete forms/"pinning" footers
|
| As-built checks
|
| Layout of construction control lines on concrete pad for
subcontractor use
|
| Elevation control over large jobsites
|
| Slopes on grade
|
| Interior leveling and aligning |
|
|
